# Disk management error after Gateway timeout **URL:** \ **Category:** StartOS Support\ **Created:** [June 7, 2026, 8:28pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233 "2026-06-07T20:28:43Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![JimK](https://community.start9.com/letter_avatar_proxy/v4/letter/j/45deac/32.png) [@JimK](https://community.start9.com/u/JimK)\ **Post date:** [June 7, 2026, 8:28pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/1 "2026-06-07T20:28:43Z")
I rebooted my ServerOne a few times after encountering a “Gateway timeout” issue and I am now stuck with the following “Disk management error”. ![image](https://community.start9.com/uploads/default/original/2X/f/fd7b44568edb7f4df4a3c592878905ebf4e488a4.jpeg) I read the below post with a similar problem to mine but not sure if the solution applies to me. > [@Disk management error on reboot](https://community.start9.com/t/disk-management-error-on-reboot/2394): > > Hi, I installed the Monero community package and rebooted a few times during the initial sync. I rebooted my device yesterday and now see the attached screen when browsing to the device’s control panel. Any advice on what I should do from here? `Disk management error. enabling repair mode Opening filesystem to check… Checking filesystem on /dev/mapper/EMBASSY\_HRAF7F5CWHL6ZBDG7FODTA7BFFFD76P5FYWJJ3FTKVXFV7DSKDLA\_package-data UUID: 88163197-7caa-40a8-a47f-bad8e3f551b0 repair mode will force to… /Jim ---
**Author:** ![StuPleb](https://community.start9.com/user_avatar/community.start9.com/stupleb/32/195_2.png) [@StuPleb](https://community.start9.com/u/StuPleb)\ **Post date:** [June 8, 2026, 1:44pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/2 "2026-06-08T13:44:09Z")
You may need to install v0.3.5.2 – [startos-0.3.5.2-de5ca3b-disk\_repair\_fix~dev\_x86\_64-nonfree.iso - Start9](https://cloud.start9labs.com/index.php/s/gGd9RiCB5j6GHjJ) ---
**Author:** ![JimK](https://community.start9.com/letter_avatar_proxy/v4/letter/j/45deac/32.png) [@JimK](https://community.start9.com/u/JimK)\ **Post date:** [June 8, 2026, 10:14pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/3 "2026-06-08T22:14:28Z")
When attempting to perform the disk repair fix with the provided iso, I am now stuck at “Initializing StartOS” with a pop-up RPC ERROR. ![image](https://community.start9.com/uploads/default/original/2X/7/7f6fecaa7bafc2ea8ec012b54fceb3d2b87bc15d.png) ---
**Author:** ![StuPleb](https://community.start9.com/user_avatar/community.start9.com/stupleb/32/195_2.png) [@StuPleb](https://community.start9.com/u/StuPleb)\ **Post date:** [June 9, 2026, 9:27am UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/4 "2026-06-09T09:27:03Z")
How did you reboot the Server One “a few times”? I’m assuming pulling the power, perhaps during startup. This can wreck havoc on the drive, the data on it and the partitions. You might now need to restore from backup. Remember, Gateway Timeout means your browser can’t find the server, and logically there’s only 1/3rd of a change between your server, network and client that this has anything to do with your server, powering off the server is going to be the wrong choice 2/3rds of the time. ---
**Author:** ![JimK](https://community.start9.com/letter_avatar_proxy/v4/letter/j/45deac/32.png) [@JimK](https://community.start9.com/u/JimK)\ **Post date:** [June 10, 2026, 2:20am UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/5 "2026-06-10T02:20:47Z")
At first reboot was done via the power button but after reading a post mentioning hard reboot, I tried reboot by pulling the power cable. Nevertheless, I tried to restore from backup but it was not accepting the drive encryption password I was providing (master password) so now I guess I will have no choice but to start from scratch. ---
**Author:** ![JimK](https://community.start9.com/letter_avatar_proxy/v4/letter/j/45deac/32.png) [@JimK](https://community.start9.com/u/JimK)\ **Post date:** [June 11, 2026, 5:21pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/6 "2026-06-11T17:21:02Z")
After failing to repair, I decided to start clean with iso version 0.3.5.1. However, I noticed a discrepancy in the version displayed in the GUI (0.3.5.6) versus the CLI (0.3.5.1). ![IMG_8146](https://community.start9.com/uploads/default/original/2X/c/cef1d314188c1483644a1e0a47592b9abb1f68d9.jpeg) ![IMG_8145](https://community.start9.com/uploads/default/original/2X/7/77bbc9181cfb8ae06e4319e21cd88befbfa2943b.jpeg) Also seeing this message even after hard refreshing the browser and marketplace not properly displaying content/icons. ![IMG_8148](https://community.start9.com/uploads/default/original/2X/1/175c2906a9802f9c3c9aa7d092224fa2ae5d7723.jpeg) ![IMG_8147](https://community.start9.com/uploads/default/original/2X/a/a9b75bfed779512b2bf11a833d9403683a950008.jpeg) ---
**Author:** ![StuPleb](https://community.start9.com/user_avatar/community.start9.com/stupleb/32/195_2.png) [@StuPleb](https://community.start9.com/u/StuPleb)\ **Post date:** [June 12, 2026, 1:16pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/7 "2026-06-12T13:16:28Z")
The only way a backup can have a different password than the one you are typing is if your OS had a different password when you made that backup. There’s no code in StartOS which lets it set up its own backup password or allows you to do so – its permanently locked to your OS password. As for starting fresh, which is fine, if doing this I don’t know why you wouldn’t instead run the latest OS, which is StartOS v040. Definitely don’t start fresh for the long term with dev builds. You’re almost not following the guides, possibly reusing the same ISO provided above (literally a rough dev build that no-one should be using for their production device) or there’s some confusion going on with files in a download folder. ---
**Author:** ![JimK](https://community.start9.com/letter_avatar_proxy/v4/letter/j/45deac/32.png) [@JimK](https://community.start9.com/u/JimK)\ **Post date:** [June 14, 2026, 6:25am UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/8 "2026-06-14T06:25:07Z")
My understanding is that version 040 is still beta. When checking the GitHub releases page, I see that the latest is beta 9. I have a Start9 ServerOne device and according to the Start9 documentation, I would need the following iso if doing a factory reset. Correct? [startos-0.3.5.1-39de098\_x86\_64-nonfree.iso](https://github.com/Start9Labs/start-os/releases/download/v0.3.5.1/startos-0.3.5.1-39de098_x86_64-nonfree.iso) If doing a factory reset with version 040, it is not clear which iso should be used. ![IMG_8172](https://community.start9.com/uploads/default/original/2X/a/a81b9ee488a6d508455f944e4104e743be8ee05c.jpeg) ---
**Author:** ![h0mer](https://community.start9.com/user_avatar/community.start9.com/h0mer/32/20_2.png) [@h0mer](https://community.start9.com/u/h0mer)\ **Post date:** [June 14, 2026, 1:44pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/9 "2026-06-14T13:44:44Z")
You’re right that 0.4.0 is still in beta — beta.9 is the latest. For your Server One (x86\_64): - **0.3.5.1 reset:** yes, the `x86_64-nonfree` ISO you linked is correct. Guide: [Start9 | Start Fresh](https://docs.start9.com/0.3.5.x/user-manual/initial-setup/initial-setup-start-fresh.html#start-over) - **0.4.0 reset:** use the **x86\_64 nonfree** build → `startos-0.4.0-beta.9-d1f153d_x86_64-nonfree.iso`. On the download page this is the one simply labeled **“x86\_64/AMD64”** (the `-nvidia` build is only for an NVIDIA GPU; the plain FOSS-only image is listed as “x86\_64/AMD64-slim”). Guide: [Installing StartOS - StartOS](https://docs.start9.com/start-os/0.4.0.x/installing-startos.html) Either version is fine for a clean start — just don’t reuse that `0.3.5.2 disk_repair_fix~dev` ISO for a permanent install; that’s almost certainly why the GUI showed 0.3.5.6 vs 0.3.5.1 in the CLI and the marketplace icons wouldn’t load. Path forward: flash an official release ISO (nonfree), then hard-refresh/clear browser cache. One important note if you go to 0.4.0: backups made on 0.3.5.1 are **not** compatible with 0.4.0. After updating you’ll need to update all your services and create a fresh backup. ---
**Author:** ![JimK](https://community.start9.com/letter_avatar_proxy/v4/letter/j/45deac/32.png) [@JimK](https://community.start9.com/u/JimK)\ **Post date:** [June 14, 2026, 5:31pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/10 "2026-06-14T17:31:20Z")
When I boot to a USB flash drive with the 0.3.5.1 non-free iso and try accessing [http://start.local](http://start.local) I initially get no page found…but when something displays on a my usual browser it is the page with previous installation certificate. This is the installation with the mixed up versions that I am trying to fix with a factory reset. ![IMG_8173](https://community.start9.com/uploads/default/original/2X/b/b88f9e4be935dc38bb9a77851f843ddf6a83f964.jpeg) I was expecting to get a screen with an option for factory reset. Can’t understand why I’m not getting this. Tried different USB drives and formatting them differently on my Windows 11 pc…hard refreshing, restarting browsers, rebooting pc is not helping either. Getting very frustrated now. Don’t know how to get this thing working again. ---
**Author:** ![h0mer](https://community.start9.com/user_avatar/community.start9.com/h0mer/32/20_2.png) [@h0mer](https://community.start9.com/u/h0mer)\ **Post date:** [June 15, 2026, 1:31pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/11 "2026-06-15T13:31:25Z")
I think your USB drives are fine — the issue is that your server isn’t booting from the USB at all. The giveaway is that the page you eventually see shows your _previous installation’s_ certificate. A fresh installer USB wouldn’t know anything about your old install, so the server is skipping the USB and booting straight into your existing StartOS on the internal drive. That’s why you never reach the re-install screen, and why reformatting USBs hasn’t changed anything. Since you’re on a Server One, here’s how to force it to boot the USB (you’ll need a monitor and keyboard attached): 1. Insert the USB, power on, and repeatedly tap **Delete** to enter the BIOS. 2. Use **Boot Override** to select the USB directly — or move the USB to the **top of the UEFI boot order** under the Boot section. 3. If the USB doesn’t show up, set **Secure Boot** to **Disabled** (enable Legacy/CSM if present). 4. Save and exit ( **F4** or **F10** ). Two things that are the usual silent culprits: - The ISO must be **burned with balenaEtcher** (or similar), not just formatted and copied onto in Windows — otherwise the stick is never bootable. - If the USB still doesn’t appear in the boot menu, try a different port and a different stick. When it boots correctly you’ll land on the installer (the start.local page _without_ your old certificate). From there choose **Re-Install StartOS** to clean up the mixed-up versions. Let me know once you reach that screen and I’ll walk you through the rest. ---
**Author:** ![JimK](https://community.start9.com/letter_avatar_proxy/v4/letter/j/45deac/32.png) [@JimK](https://community.start9.com/u/JimK)\ **Post date:** [June 15, 2026, 11:41pm UTC](https://community.start9.com/t/disk-management-error-after-gateway-timeout/5233/12 "2026-06-15T23:41:47Z")
Thanks h0mer. After changing the boot order to prioritize the USB, the sever booted properly and I was able to reinstall 0.3.5.1. Now both the StartOS GUI and CLI are displaying the same version. Much appreciated, Jim