# \[Known-Good Hardware Master List\] Hardware Capable of Running StartOS

**URL:** <https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/66>\
**Category:** DIY Community\
**Tags:** hardware, diy\
**Created:** [December 7, 2022, 9:05pm UTC](https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/66 "2022-12-07T21:05:21Z")\
**Posts on this page:** 1\
**Showing post:** 206

<div class="post-metadata">

**Author:** ![JG.MaDe](https://community.start9.com/letter_avatar_proxy/v4/letter/j/fbc32d/32.png) [@JG.MaDe](https://community.start9.com/u/JG.MaDe)\
**Post date:** [July 10, 2025, 5:04pm UTC](https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/66/206 "2025-07-10T17:04:19Z")

</div>

Hi everyone, here were the steps to getting my Beelink Mini S13 N150 up and running.

- Make sure in the BIOS, set Boot Option #1 to USB Device and Boot Option #2 to Internal drive
- Must run it “headless” (disconnect HDMI cable) or else you will get an error
- Follow instruction from Start9  
- Go to start.local in your browser  
- Install StartOS  
- Remove USB thumb drive and press REBOOT
- Remove USB thumb drive (only have the power and ethernet cable plugged in)
- Restart your Mini PC
- Wait 5 minutes, then go to start.local in your browser and refresh the page
- This should get you to the StartOS Setup

I hope this helps anyone with a similar pc!

---

_[View the full topic](https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/66)._