# \[Known-Good Hardware Master List\] Hardware Capable of Running StartOS

**URL:** https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/66
**Category:** DIY Community
**Tags:** hardware, diy
**Created:** [December 7, 2022, 9:05pm UTC](https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/66 "2022-12-07T21:05:21Z")
**Posts on this page:** 1
**Showing post:** 247

<div class="post-metadata">

### Author: ![satoshi626](https://community.start9.com/letter_avatar_proxy/v4/letter/s/41988e/32.png) [@satoshi626](https://community.start9.com/u/satoshi626)
#### Post date: [January 15, 2026, 8:23am UTC](https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/66/247 "2026-01-15T08:23:13Z")

</div>

Successfully working on MSi H410M Pro MB but only after two days of troubleshooting all BIOS settings. In the end I only got it to work by placing the bootloader at /EFI/BOOT/BOOTX64.EFI as described in this post:

> [@How to make StartOS run on Minisforum UN1290](https://community.start9.com/t/how-to-make-startos-run-on-minisforum-un1290/3212):
>
> While StartOS worked well on an earlier similar Minisforum model (the UN1265), I discovered that the Minisforum UN1290 doesn’t go as expected. This model is running a newer/nicer BIOS (listed on the Main tab as “BIOS Version 1.06”, and in the footer as “Version 02.22.0058 Copyright American Megatrends International LLC”). The installation goes fine, but upon reboot, the miniPC behaves as if there is no bootable device. After some tinkering, I’ve gotten it to work with a minor hack, so thought…

---

_[View the full topic](https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/66)._