# XBT Node and BTC Node in one device?

**URL:** <https://community.start9.com/t/xbt-node-and-btc-node-in-one-device/5877>\
**Category:** StartOS Support\
**Created:** [October 24, 2026, 10:12am UTC](https://community.start9.com/t/xbt-node-and-btc-node-in-one-device/5877 "2026-10-24T10:12:06Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![1BC7RQG](https://community.start9.com/letter_avatar_proxy/v4/letter/1/a88e57/32.png) [@1BC7RQG](https://community.start9.com/u/1BC7RQG)\
**Post date:** [October 24, 2026, 10:12am UTC](https://community.start9.com/t/xbt-node-and-btc-node-in-one-device/5877/1 "2026-10-24T10:12:06Z")

</div>

Hi guys, I’d like to set up a node for XBT.

Been running a StartOS BTC node on an Intel i5 with 16 Gb RAM with great success using Knots and Electrs. I have it set up with two SSDs; one for OS and services, the other for the blockchain.

Would it be possible to install Knots and Fulcrum and then direct it to a third SSD for the XBT chain which is connected to the computer via (powered) USB?

Or do I need a completely separate device?

I’d prefer one machine for everything for many reasons. Power consumption, saving space, saving a little money.

How are you guys doing this? Anyone else using only one machine?

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![1BC7RQG](https://community.start9.com/letter_avatar_proxy/v4/letter/1/a88e57/32.png) [@1BC7RQG](https://community.start9.com/u/1BC7RQG)\
**Post date:** [November 3, 2026, 4:43pm UTC](https://community.start9.com/t/xbt-node-and-btc-node-in-one-device/5877/2 "2026-11-03T16:43:57Z")

</div>

Going with two devices now. Running both in one node will most likely only work with a very large SSD for both chains since StartOS seems to only be able to talk to one external drive.

---

<div class="post-metadata">

**Author:** ![shurtenburt](https://community.start9.com/letter_avatar_proxy/v4/letter/s/5fc32e/32.png) [@shurtenburt](https://community.start9.com/u/shurtenburt)\
**Post date:** [November 4, 2026, 10:35am UTC](https://community.start9.com/t/xbt-node-and-btc-node-in-one-device/5877/3 "2026-11-04T10:35:14Z")

</div>

Yes it is possible, see here:

> [@Running Bitcoin Blake2B chain alongside the AES256 chain](https://community.start9.com/t/running-bitcoin-blake2b-chain-alongside-the-aes256-chain/5840):
>
> I am currently on StartOS 0.4.0.2 and have these installed: Bitcoin Knots (pre-RDTS) #knotsprerdts:29.3:29 Electrs 0.11.1:20 Mempool 3.3.1:25 I would like to run the Blake2B chain in parallel/alongside, and point the Shrike wallet at it. I have found Pauls repository ([https://start9.paulscode.com](https://start9.paulscode.com)), and I think adding these services should do the trick if I understand it, as they would use different ports than the ones above. Bitcoin Knots (BLAKE2b) Companion (Is a pruned version of the bla…

No need for additional SSD, when you use the pruned Knots node. The chain is anyway the same before August.

---

<div class="post-metadata">

**Author:** ![1BC7RQG](https://community.start9.com/letter_avatar_proxy/v4/letter/1/a88e57/32.png) [@1BC7RQG](https://community.start9.com/u/1BC7RQG)\
**Post date:** [November 4, 2026, 10:55am UTC](https://community.start9.com/t/xbt-node-and-btc-node-in-one-device/5877/4 "2026-11-04T10:55:41Z")

</div>

As a… “bitcoiner” I am naturally averse to pruned nodes but in this case it actually makes sense… Thanks!
