Hi everyone, here were the steps to getting my Beelink Mini S13 N150 up and running.
- Make sure in the BIOS, set Boot Option #1 to USB Device and Boot Option #2 to Internal drive
- Must run it “headless” (disconnect HDMI cable) or else you will get an error
- Follow instruction from Start9
- Go to start.local in your browser
- Install StartOS
- Remove USB thumb drive and press REBOOT - Remove USB thumb drive (only have the power and ethernet cable plugged in)
- Restart your Mini PC
- Wait 5 minutes, then go to start.local in your browser and refresh the page
- This should get you to the StartOS Setup
I hope this helps anyone with a similar pc!