[Known-Good Hardware Master List] Hardware Capable of Running StartOS

DIY Community Support
,
149

Hi. What format is the drive?
I am stuck trying to set up the os on a 7010 with on ssd for the system and services and an hhd for data. SSH alone boot fine into the initial set up. If I add the hhd, the booting get stuck for a while then I get a bunch of errors.

151

Please create a new topic in the DIY forum for the issue with the 7010.

152

Hello, I am successfully running StartOS on a T9 Mini PC
CPU Intel N100
RAM 16 Gb
SSD 2 TB (2242)

IMG_1470
IMG_14701920×1322 119 KB

3 Likes
153

Hi Plebs,

Running StartOS on Beelink SER8 Mini PC
Processor: AMD Ryzen 7 8845HS
Memory: 32 GB DDR5
Drive: SSD Predator GM7000 4TB M.2 NVME GEN4

and

Intel NUC 11
Processor: Core i7-1165G7
Memory: 32GB DDR4 RAM
Drive: 2TB NVMe SSD Kingstone

2 Likes
154

Successful non-free install on an HP ENVY Desktop - TE01-1022

Was getting a ‘no wifi instance’ error until I updated the BIOS to F.50

Wish I’d read this thread first :blush:

1 Like
155

Start9 fully installed and successfully running the following:

  • Bitcoin Core
  • Electrs
  • Mempool
  • LND
  • ThunderHub
  • Lightning Terminal

The hardware is as follows:

  • Trigkey Green G4 Mini PC
  • Intel 11th Gen N100 3.4Ghz 4 Core Processor
  • 16Gb DDR4 SO-DIMM RAM
  • 2TB Crucial MX500 NAND SATA SSD (fitted as additional drive, but BIOS configured to use it as the main boot drive).

Everything has been running fine so far.

4 Likes
156

Successfully running Start9 non-free install on an HP Elitedesk G3 800 i5 6500.

Replaced the stock 8 RAM & 256GB SSD with 16GM RAM & 2TB SSD.

Everything is running very smoothly.

3 Likes